Pigeon Spike Composite:
-
Durable 304 stainless steel wires and flexible plastic base
-
Each 13" long strip has 20 flat-tipped points
-
The plastic is Durolon UV-stabilized polycarbonate
-
Measures 6" wide, 5" high and can cover up to 7" of surface
-
Thin wires make this a discreet surface deterrent for pigeons and seagulls
-
Install with Screws (not supplied) or Adhesive
Applications
Use on all types of surfaces to hinder light roosting of pigeons and seagulls. For pigeons and seagulls only, not recommended for other birds or for controlling heavy infestations of any bird. To control all birds on all types of surfaces, use
Nixalite's Premium Bird Barrier Strips.
Basic Installation Instructions: For detailed instructions download the
Pigeon Spike Brochure.
Prepare the surface: Clean the surface thoroughly. It must be clean, dry and free of any bird waste. Repair any damage there might be to the installation surface.
Layout the spike positions: Using the
Pigeon Spike Estimating and Spacing Guidelines, mark where the center of each spike row will be placed.
Fit it first, then fasten it: Make sure each piece fits the surface before installing. Find the Quick-Part seam that is just longer than the desired length. Gently bend the base up and down at the Quick-Part seam until it parts.
Overhang the first spike at least ½” at the end of a surface. Adjust length if needed to ensure this overhang.
For best results cut off the excess plastic base flush to the 1st spike overhanging the edge.
When butting the strips end-to-end, use the alignment notch at each end of the base. Do not allow gaps between strips or between a strip and object.
Fastening Pigeon Spikes
If fastening with adhesive, follow the manufacturers instructions printed on the adhesive container.
If installing with the optional Nixalite hardware (screws ordered separately), contact Nixalite with any questions.
Pigeon Spike Composite is our affordable combination stainless steel wires and flexible UV stabilized plastic base, full row bird control spike that deters pigeons and seagulls only. It can be installed quickly on all types of surfaces.
Each 13" long strip has 20 stainless steel points and measures 6" wide, 5" high and can cover up to 7" of surface.
Mounting Hardware for Pigeon Spike Plastic Narrow is not included and must be purchased separately from the accessory list below or the Mounting Hardware page.
(1 cartridge of adhesive will cover up to 20' or use 2 screws for every strip.)
Bird Spike Comparison Chart
FREE Nixalite Product Catalog
Installing Pigeon Spike Composite