Click an image to see a larger picture.

4 The Birds - Bird Repellent Gel

4 The Birds Gel Repellent is a transparent sticky gel used to deter pigeons and starlings from landing on surfaces. This polybutene gel is EPA registered (Registration No. 8254-5-56) for use as a repellent for pigeons and starlings. 4 The Birds is applied on bird resting places, such as window sills, roof ridges, gutters, parapets and ledges. It can deter birds for up to a year depending on the environment. Airborne contaminants and debris can cover the gel, reducing effectiveness. If completely coated, remove existing gel, clean the surface thoroughly and reapply.

Available in singles or cases of 12 cartridges
Made in the USA

EPA Registration No. 8254-5-56

4 The Birds - Bird Repellent Gel

Options:
Item #:
Price:
Sale Price:
Not available for International, Canada, Virginia
Qty:

Application Instructions
Clean-Up
Downloads

Before Applying:

Clean the surfaces thouroughly. Remove dirt, droppings and other debris. Apply product to a clean dry surface.
When cleaning surfaces, take the necessary steps to protect yourself against bird waste hazards.
Treat porous and textured surfaces with an under coating such as paint or sealer. see product label for more details.
4 The Birds works in hot and cold temperatures. It retains its tack from 15º up to 200º F.
4 The Birds is labeled for use in repelling pigeons and starlings. Do Not apply where desirable bird species are present.

Coverage: 4 The Birds is applied to clean and dry surfaces in beads. When applied as directed, each cartridge should yield 10 feet of repellent bead.

Cut the tip at a slight angle, leaving the lip on the spout so you can cap the partially used containers
Load the cartridge in a caulking gun and break the seal. When applying repellent, press against the surface to help ensure good adhesion.
Apply beads of repellent no larger than 1/2" wide by 1/2" high. DO NOT COVER THE ENTIRE SURFACE!
For surfaces less than 4" wide, apply one bead of repellent 1" from the outside edge. For surfaces 4" and wider, apply one bead 1" from the outside edge and additional beads for every additional 2" in surface depth.
Leave a small gap in the bead of repellent every 1 to 2 feet to allow for water drainage.

TIP: Lay down strips of water resistant tape on the surface and apply the 4 The Birds Gel to the tape. That way if it becomes necessary to reapply because of dust & debris buildup you can simply pull up and discard the tape and repellent. To reapply, repeat the process.

Use mineral spirits to remove product from treated surfaces, equipment or other materials.

4 The Birds Repellent Brochure
4 The Birds SDS

EPA Registration No. 8254-5-56