4 The Birds®
Gel Bird Repellent
Clear, non-drying sticky gel used to
repel pigeons and starlings.
4 The Birds repellent is a transparent sticky gel used to
deter pigeons and starlings from landing on surfaces.
This polybutene gel is EPA registered
(Registration No. 8254-5-56) for use as a repellent for pigeons and starlings. 4 The Birds
is applied on bird resting places, such as window sills, roof
ridges, gutters, parapets and ledges. It can deter birds for up to a
year depending on the environment.
Airborne contaminants and debris
can cover the gel, reducing effectiveness. If completely
coated, remove existing gel, clean the surface thoroughly and
Download 4 The Birds
Gel Specimen Label (PDF)
Availability: Available in all 50 States. Not available
for foreign availability.
Order 4 The Birds
Gel Repellent Here:
Clean the surfaces thoroughly. Remove dirt, dropping and other
debris. Product must be applied to a clean and dry surface.
When cleaning surfaces, take the necessary steps to protect
yourself against bird waste hazards.
Treat porous and textured surfaces with an under coating such as
paint or sealer. See the product label for more details.
4 The Birds works in hot and cold temperatures. It retains its
tack from 15o F. up to 200o F.
- 4 The Birds is labeled for use in repelling pigeons and
starlings. Do Not apply where desirable bird species are
Coverage - 4 The Birds is applied to clean and dry surfaces
in beads. When applied as directed, each cartridge should yield 10
feet of repellent bead.
- Cut the tip at a slight angle, leaving the lip on the spout
so you can cap partially used containers.
- Load the cartridge in a caulking gun and break the seal.
When applying repellent, press against the surface to help
ensure good adhesion.
- Apply beads of repellent no larger than1/2" wide by 1/2"
high. DO NOT COVER THE ENTIRE SURFACE.
- For surfaces less than 4" wide, apply one bead of repellent
1" from the outside edge. For surfaces 4" and wider, apply one
bead 1" from the outside edge and additional beads for every
additional 2" in surface depth.
- Leave a small gap in the bead of repellent every 1 to 2 feet
to allow for water drainage.
TIP: Lay down
strips of water resistant tape on the surface and apply the 4 The Birds Gel to
the tape. That way if it becomes necessary to reapply because of
dust & debris buildup you can simply pull up and discard the tape
and repellent. To reapply, repeat the process.
Use mineral spirits to remove product from treated surfaces,
equipment or other materials.
Return to the Bird Control Products main.
Back To Top